How to Upgrade, Pair and Use the PikaBoost 2 Remote Controller
Upgrade & control guide
How to Upgrade, Pair and Use the PikaBoost 2 Remote Controller
Choose the correct remote for your edition, activate the Lite upgrade, install the brake sensor, pair the controller, and learn what every button does.
Quick answerIf you own PikaBoost 2 Lite, use the official PikaBoost 2 Lite Upgrade Kit and activate it through the LIVALL Riding App. Do not buy the Powerful-edition replacement remote as a Lite upgrade. PikaBoost 2 Powerful already includes a remote; its standalone controller is a replacement part.
Choose the Correct PikaBoost 2 Remote
The two remote-controller purchase paths look similar, but they serve different owners. Confirm your PikaBoost 2 edition before ordering.
Use the Lite Upgrade Kit
The current kit includes a smart remote controller and a three-month Pro Access activation code. LIVALL lists Cruise Control, Workout Mode, and AI-Assist among the upgrade features. Subscription terms apply after the included trial; standard Assist Mode remains available.
Use the Included or Replacement Remote
The Powerful Edition already includes a remote and multiple riding modes. The standalone PikaBoost 2 remote is sold only as a spare or replacement for this edition; it does not include a Lite activation code or subscription features.
How to Upgrade PikaBoost 2 Lite
Have the remote, activation email, PikaBoost 2, and the latest LIVALL Riding App ready before starting. Keep the bicycle stationary throughout setup.
Purchase the Lite Upgrade Kit
Use the official Lite-owner product page. The Powerful replacement remote does not provide the Lite upgrade entitlement.
Open the activation email
Locate the upgrade code sent with the package purchase. Keep it available while signing in to the app.
Power on PikaBoost 2
Confirm the battery is installed and the main unit starts normally. Do not perform activation while riding.
Connect in the LIVALL Riding App
Open the PikaBoost 2 device page, connect to the unit, enter the activation code, and complete the in-app upgrade prompts. Menu wording may vary by app version.
Bring the remote close to PikaBoost 2
Power the remote and keep it close to the control module for pairing. A successful connection is confirmed by two quick indicator blinks.
Confirm the upgraded controls
With the bicycle stationary, test L and R, check the available riding modes in the app, and verify the brake sensor before the first ride.
How to Pair a New or Replacement Remote
For first-time setup, the official manual instructs users to match the remote with PikaBoost 2 through the app. When the powered remote is within 5 meters of the unit, it should connect; the indicator blinks twice quickly after a successful connection.
When replacing a lost or damaged Powerful-edition remote:
- Power on the new remote and keep it close to the PikaBoost 2 control module.
- Watch for the PikaBoost 2 tail light to blink once per second, indicating a pending connection.
- Press the power button on PikaBoost 2 within 10 seconds to confirm.
- Look for two quick indicator blinks.
- Press L and R while stationary and confirm the matching rear turn signals.
Install the Remote and Brake Sensor
Mount the receiver beside the rear brake lever using the supplied rubber band. Position the brake sensor and magnet so they stay together when the brake is released and separate when you pull the rear brake lever. That change tells the paired PikaBoost 2 to stop motor assistance.
Mounting checklist
- Use the rear brake lever, not the front brake.
- Keep the remote reachable without releasing the grip.
- Secure the receiver with the supplied rubber band.
- Clean and dry adhesive contact areas first.
- Do not stretch or pinch the sensor cable.
- Confirm the sensor and magnet do not rub.
- Pull the brake repeatedly and watch the indicator.
- Replace weakened adhesive before it detaches.
What Every Remote Button Does
Remote actions depend on the active riding mode. The same up and down buttons change assistance level in Assist Mode and speed in Cruise Mode.
How to change riding modes
- Pair the remote, mount it beside the rear brake lever, and keep the bicycle stationary.
- Select Assist Mode: short-press the top three-dot mode button.
- Select Cruise Mode: long-press the same three-dot mode button. Cruise Mode is unavailable in regions that do not support it.
- Start or exit the selected mode: short-press the center square button. Exit to Standby before walking or moving the bicycle by hand.
- L: left turn signal
- R: right turn signal
- Up: Powerful level in Assist Mode; accelerate in Cruise Mode
- Down: Standard level in Assist Mode; decelerate in Cruise Mode
- Top three-dot mode button: short-press for Assist Mode; long-press for Cruise Mode
- Center square: short-press to start or exit the selected riding mode
| Current state | Remote action | Expected result |
|---|---|---|
| Standby | Short-press the top mode button (•••) | Enter Assist Mode |
| Assist Mode | Press up or down | Select Powerful or Standard assistance |
| Assist Mode | Long-press the top mode button (•••) | Enter Cruise Mode where the edition, activation, region, and local rules allow it |
| Cruise Mode | Press up or down | Increase or decrease the set speed |
| Selected or active riding mode | Short-press the center square | Start or exit the selected mode; exiting returns PikaBoost 2 to Standby |
| Any connected state | Press L or R | Operate the corresponding PikaBoost 2 turn signal |
Use the LIVALL Riding App for modes or settings that are not available through the remote. Cruise Mode is not available in every country or riding environment. Check the current PikaBoost 2 Cruise Mode guidance and local rules before use.
Run a Stationary Safety Test
- Support the bicycle securely in a clear area and turn on PikaBoost 2.
- Confirm the remote is firmly mounted and paired.
- Press L and R, then verify the correct rear signal each time.
- Pull the rear brake and confirm the brake indicator changes and assistance is cut.
- Release the lever and confirm the brake state clears.
- Select Standby before walking or moving the bicycle by hand.
- Begin with a low-speed test in a clear area permitted by local rules.
Remote Controller Troubleshooting
| Symptom | Check | Action |
|---|---|---|
| Remote will not pair | Edition, remote power, app connection, distance | Confirm you have the correct Lite kit or Powerful replacement, update the app and firmware, move within 5 meters, and repeat pairing. |
| L or R does not control the light | Pairing confirmation | Reconnect until the indicator blinks twice, then test both buttons while stationary. |
| Brake does not cut assistance | Sensor and magnet alignment | Reposition them so braking creates a clear separation; test repeatedly before riding. |
| Cruise Mode is missing | Edition, Lite activation, region, app settings | Confirm Pro access where required, update the app and firmware, and check whether Cruise Mode is allowed in the selected region. |
| Remote or sensor moves | Rubber band and adhesive pads | Stop riding, remount the receiver, and replace weak adhesive before the next ride. |
Frequently Asked Questions
Can I add a remote controller to PikaBoost 2 Lite?
Yes. Use the official PikaBoost 2 Lite Upgrade Kit and complete its activation flow in the LIVALL Riding App. The Powerful-edition replacement remote is not the Lite upgrade product.
Does PikaBoost 2 Powerful need the Lite Upgrade Kit?
No. The Powerful Edition already includes a remote controller and multiple riding modes. Its standalone remote is sold as a spare or replacement.
How do I know the remote is paired?
The official manual states that the indicator blinks twice in quick succession after a successful connection. Test L and R before riding.
Why is Cruise Mode unavailable?
Availability depends on the edition, activation status, app and firmware version, region, and local rules. Confirm the remote and brake sensor are connected, then review the current region setting and official Cruise Mode guidance.
Can I use the remote without installing the brake sensor?
Do not use Cruise Mode without a correctly installed and tested brake sensor. The sensor is the remote system's brake signal and tells PikaBoost 2 to stop assistance when the rear brake is applied.
Choose the right upgrade for your edition
Lite owners need the activation-enabled upgrade path. Powerful owners can use the included controller or order the dedicated replacement.
Leave a comment