PikaBoost 2 Cruise Mode Unavailable? Enable It on Private Roads
If Cruise Mode is greyed out in the LIVALL Riding App and you see “The current region does not support this mode,” your PikaBoost 2 is applying the riding restrictions for the selected region. Where Cruise Mode is permitted on private property, you can select Private road/Off road in the Region setting. After the setting is changed, Cruise Mode becomes available for use in an appropriate private-road or off-road area.
Quick answer
Connect PikaBoost 2 in the LIVALL Riding App, open the device settings, change Region to Private road/Off road, and then return to Riding Mode to select Cruise Mode. Use this setting only on private land or an off-road area where motor-only operation is permitted and you have the owner's permission.
Important: Changing the app to Private road/Off road enables the product function; it does not turn a public road, cycle lane, shared path or public park into a private riding area. Always follow the rules for the exact place where you ride.
Why Does the App Say Cruise Mode Is Not Supported?
PikaBoost 2 Cruise Mode can maintain forward power without continuous pedaling. In some countries and regions, an ordinary road-legal e-bike must provide pedal assistance only, so the LIVALL Riding App may disable Cruise Mode for the selected public-road region.
When this restriction applies, Cruise Mode appears grey. Tapping it may display the message “The current region does not support this mode.” This normally indicates a region-based availability setting—not necessarily a product fault.
Before changing the setting
Confirm that you are actually riding on private property or in an off-road area where this type of motor operation is allowed. A quiet street, cycle path or public trail is still public space unless the responsible authority says otherwise.
How to Enable PikaBoost 2 Cruise Mode on a Private Road
LIVALL's official Cruise Mode instructions explain that the mode is restricted in some areas and can be used by selecting Private road/Off road when appropriate. The wording or menu position may vary slightly by app version, but the setup follows this sequence:
Step 1 — Connect the device
Turn on PikaBoost 2, open the LIVALL Riding App and confirm that the device status shows Connected.
Step 2 — Open the Region setting
Enter the PikaBoost 2 device page and open its settings. Locate Region or the region-selection option.
Step 3 — Select Private road/Off road
Choose Private road/Off road and confirm the on-screen notice. This tells the app that the device will be used outside the selected public-road profile.
Step 4 — Return to Riding Mode
Go back to the device page, tap Riding Mode, and select Cruise Mode. The option should now be available instead of greyed out.
Step 5 — Test it in a clear private area
Check the remote controller, brake sensor and motor cut-off response at low speed before normal use.
If Cruise Mode remains unavailable, update the LIVALL Riding App, confirm that the remote controller and brake sensor are installed and connected, restart the device, and check the Region setting again. The PikaBoost 2 Powerful Edition includes the remote controller required for convenient switching between Assist Mode and Cruise Mode.
What Does PikaBoost 2 Cruise Mode Do?
According to the PikaBoost 2 user manual, Cruise Mode maintains the current riding speed after the bicycle is moving. Unlike Assist Mode, it does not require the rider to keep pedaling continuously to receive power.
| Mode | How it works | Best use |
|---|---|---|
| Assist Mode | Motor assistance responds to pedaling. | Public-road riding where the mode meets local e-bike requirements. |
| Cruise Mode | Maintains power without continuous pedaling; speed can be adjusted with the controls. | Permitted private roads or off-road areas after the correct Region setting is selected. |
The remote controller can be used to switch modes and adjust the riding response. Applying the brake should cause the brake sensor to stop motor power, which is why the sensor must be installed and tested correctly before using Cruise Mode.
Public Road vs Private Road: What Is the Difference?
The setting controls which functions the app makes available. The riding location determines whether using those functions is allowed.
| Location | Recommended setting | What to confirm |
|---|---|---|
| Public road or cycle path | Use the correct public-road region and only the modes it permits. | Motor power, assisted speed, pedal requirement and path-access rules. |
| Private road or off-road area | Select Private road/Off road to make Cruise Mode available. | Owner permission, site rules, local law, surface conditions and safe separation from others. |
Private property is not automatically unrestricted. Residential communities, campuses, private car parks, event grounds and managed trails can still have traffic or insurance rules. Use Cruise Mode only where the landowner or site operator permits it.
Why Cruise Mode Availability Differs by Country
Many e-bike laws distinguish pedal assistance from motor-only propulsion. Cruise Mode can continue providing power without continuous pedaling, so it may not fit the ordinary public-road e-bike category in some regions.
| Region | Public-road consideration | Practical approach |
|---|---|---|
| European Union | The ordinary 250W pedal-assist exclusion requires assistance to cut off when pedaling stops and before 25 km/h. | Use a compliant pedal-assist mode in public; reserve Cruise Mode for permitted private/off-road use. |
| United Kingdom | No-pedal propulsion can require vehicle approval rather than ordinary EAPC treatment. | Do not use Cruise Mode in public without the required approval; use Private road/Off road only in an appropriate private area. |
| United States | State e-bike classes and road, lane and trail access rules vary. | Check both state law and the rules for the exact riding location before deciding which setting to use. |
| Queensland, Australia | Current public-place rules emphasize pedal assistance, with throttle use limited for starting. | Keep Cruise Mode off in public and use it only on a permitted private road or off-road site. |
These examples explain why the app may restrict Cruise Mode by region. Rules can change and may also differ by state, province, city, park or trail. Check the current transport authority and site rules before riding.
Safety Checks Before Using Cruise Mode
After selecting Private road/Off road and enabling Cruise Mode, test the system at low speed in a clear area. Do not begin near traffic, pedestrians, steep descents or obstacles.
- Confirm the location: make sure private/off-road use is permitted and obtain the owner's approval.
- Check the remote: confirm that it is securely mounted, connected and responding normally.
- Inspect the brake sensor: verify that the sensor and magnet are aligned and cannot move.
- Test motor cut-off: squeeze the brake and confirm that motor power stops immediately.
- Start slowly: learn the acceleration, deceleration and mode-exit controls in an open area.
- Return to Assist or Standby: leave Cruise Mode before entering public space, walking the bicycle or making adjustments.
Do not ride until the motor cut-off works
If braking does not reliably stop assistance, the remote disconnects, the sensor moves or the mounting clamp is loose, stop using Cruise Mode and check the installation.
Frequently Asked Questions
Why is Cruise Mode greyed out?
The selected public-road region may not support Cruise Mode. If you are using PikaBoost 2 in a permitted private-road or off-road area, change the Region setting to Private road/Off road and return to the Riding Mode menu.
Can I use Cruise Mode after selecting Private road/Off road?
Yes. The setting makes Cruise Mode available for use. You should only activate it in a private-road or off-road location where the owner permits riding and local rules allow motor-only operation.
Does Private road/Off road make Cruise Mode legal on public roads?
No. It enables the feature but does not override road law. Return to the correct public-road region and a compliant riding mode before entering public traffic or cycle infrastructure.
Why is Cruise Mode still unavailable after changing the Region setting?
Check that the app and device firmware are current, PikaBoost 2 shows Connected, and the remote controller and brake sensor are correctly installed. Restart the app and device, then verify the Region and Riding Mode settings again.
Does the Powerful Edition include what Cruise Mode needs?
The Powerful Edition includes the PikaBoost 2 remote controller and supports multiple riding modes, including Cruise Mode. Availability still depends on the selected Region setting and correct installation.
How do I leave Cruise Mode?
Use the remote controls to decelerate or switch modes, and apply the brake to stop motor assistance. Return to Assist Mode or Standby before leaving the permitted private riding area.
The Bottom Line
If the LIVALL Riding App says your current region does not support Cruise Mode, the feature is being limited by the selected regional profile. For permitted private-road or off-road use, select Private road/Off road, return to Riding Mode, and activate Cruise Mode.
The setting enables the feature, but the rider is still responsible for choosing a suitable location, obtaining permission and following local rules. Test the remote and brake sensor before every Cruise Mode ride.
Before buying or installing the kit, compare PikaBoost 2 editions and use the PikaBoost 2 compatibility guide to check your bicycle.
Explore PikaBoost 2 Powerful Edition
View Powerful Edition
